Page 1 of 1

Wanted: Piece of pipe for crossmember hole

Posted: Thu Jan 26, 2017 11:18 am
by broke
As it says in the title. I'm after something 3.5"-4" diameter to enlarge my crossmember exhaust hole, only has to be 100mm long possibly even less.

Thanks.

Re: Wanted: Piece of pipe for crossmember hole

Posted: Thu Jan 26, 2017 4:05 pm
by 85_Z31
I could ask the workshop if they could roll you a piece of 18 gauge ?

Wont be very thick though, maybe only 1.2mm

Re: Wanted: Piece of pipe for crossmember hole

Posted: Thu Jan 26, 2017 4:12 pm
by broke
Yeah that would work if nothing else comes through, would have to be cheap though!

I don't think the original material is very thick so that shouldn't be an issue.

Re: Wanted: Piece of pipe for crossmember hole

Posted: Thu Jan 26, 2017 10:00 pm
by 85_Z31
broke wrote:Yeah that would work if nothing else comes through, would have to be cheap though!

I don't think the original material is very thick so that shouldn't be an issue.


I could get 2 of them rolled for you, then double skin them up and spot together ?

If i can find some non Galv then my mate Dave will hook me up. I spent 2 days working helping him to fix the CNC plasma

Re: Wanted: Piece of pipe for crossmember hole

Posted: Fri Jan 27, 2017 7:46 am
by broke
Hamish is having a look for me too, I'll let you know if he can't come up with anything. Cheers.

Posted: Fri Jan 27, 2017 3:15 pm
by Datto_610
What about Nick M? He might have some exhaust tube lying around?

Re: Wanted: Piece of pipe for crossmember hole

Posted: Fri Jan 27, 2017 3:51 pm
by broke
All sorted guys, thanks!

Re: Wanted: Piece of pipe for crossmember hole

Posted: Tue Jan 31, 2017 1:24 pm
by 85_Z31
My guy turned up today with a couple of pieces of 100mm sheet metal rolled into a cross member circle. they are 1.2mm thick.

If anybody wants one just hit me up, i have 2 of these extra.