Datsun 1600 parting out

Sell stuff
User avatar
broke
Committee Members
Posts: 945
Joined: Mon Apr 04, 2011 11:25 pm
aka: John
Location: Christchurch

Re: Datsun 1600 parting out

Postby broke » Fri Sep 22, 2017 1:57 pm

IMG_2616.JPG
DatsunP510 wrote:Does it have the board that sits behind the rear seat, and the board that portions off the fuel tank from the rest of the boot?
You do not have the required permissions to view the files attached to this post.

b31x
Newbie
Posts: 9
Joined: Fri Dec 16, 2016 10:32 pm
Location: Cambridge

Re: Datsun 1600 parting out

Postby b31x » Tue Oct 03, 2017 10:13 pm

Does it have interior door opener plastic backing? The plastic around and behind the handle...

User avatar
broke
Committee Members
Posts: 945
Joined: Mon Apr 04, 2011 11:25 pm
aka: John
Location: Christchurch

Re: Datsun 1600 parting out

Postby broke » Wed Oct 04, 2017 8:31 am

b31x wrote:Does it have interior door opener plastic backing? The plastic around and behind the handle...


I'm not 100% sure what you mean, there is that big thin plastic washer behind the door opener lever, is that the bit you're talking about? Or do you mean the armrest/handle bit?

RatsunDatsun
Newbie
Posts: 39
Joined: Tue Oct 16, 2012 2:47 am
Location: Alexandra

Re: Datsun 1600 parting out

Postby RatsunDatsun » Tue Oct 10, 2017 11:25 am

Hey,

I'm after a pile of stuff:

Anything you can help with would be greatly appreciated. Really only after stuff in good nick, as my car has most (but not all!) things, but seen better days!

Thanks

- original steering wheel
- Steering column surround
- Dash Gauge cluster surround
- Glove box - Sun visors
- Rear parcel tray
- Under dash parcel tray
- Front Seat rails
- Front seat mounts (rails sit on these)
- Left side c pillar head lining fabric
- Inner wheel arch vinyl
- Arm rests
- Original boot mat
- Factory jack and winder
- Tool bag
- Tools
- Original wheels and hub caps
- Boot fuel tank separating board
- Rear seat insulator panel
- Rear boot Datsun badge
- Front guard 'Deluxe' badges
- Sill rocker trims
- Front bumper
- Rear tail light separator steel piece
- Drive shaft
- Half shafts
- Datsun rocker cover
- Underdash vent tubes
- Rear brake backing plates
- Drivers door handle

User avatar
broke
Committee Members
Posts: 945
Joined: Mon Apr 04, 2011 11:25 pm
aka: John
Location: Christchurch

Re: Datsun 1600 parting out

Postby broke » Tue Oct 10, 2017 1:59 pm

[quote="RatsunDatsun"]Hey,

I'm after a pile of stuff:

Anything you can help with would be greatly appreciated. Really only after stuff in good nick, as my car has most (but not all!) things, but seen better days!


- Dash Gauge cluster surround $40 without gauges, $80 with

- Drive shaft $50
- Half shafts $50 a pair, I haven't looked at them but they should be fine
- Datsun rocker cover $40 for the 1970 one on it
- Rear brake backing plates $40, they'll have some surface rust like they all do though

Rest is probably not in good enough condition for what you want.

RatsunDatsun
Newbie
Posts: 39
Joined: Tue Oct 16, 2012 2:47 am
Location: Alexandra

Re: Datsun 1600 parting out

Postby RatsunDatsun » Thu Oct 26, 2017 1:06 pm

Hey there,

Sorry for delay in responding. Work has been crazy.
All sounds good. Don't need the guage cluster, just the surround.

Also, if there is other stuff on my list that you have and its restorable (i.e. things like jack winder etc) send me a pic if you can and I can assess whether its something I can restore or not.

Let me know how you want paid and I can organize a mate to come collect if that works??

Thanks

User avatar
broke
Committee Members
Posts: 945
Joined: Mon Apr 04, 2011 11:25 pm
aka: John
Location: Christchurch

Re: Datsun 1600 parting out

Postby broke » Fri Oct 27, 2017 9:14 am

RatsunDatsun wrote:Hey there,

Sorry for delay in responding. Work has been crazy.
All sounds good. Don't need the guage cluster, just the surround.

Also, if there is other stuff on my list that you have and its restorable (i.e. things like jack winder etc) send me a pic if you can and I can assess whether its something I can restore or not.

Let me know how you want paid and I can organize a mate to come collect if that works??

Thanks


No worries, sorry I've had a ton of enquiries and so a lot is sold, the dash surround is on trademe at the moment so can't sell that sorry, I still have the other parts on your list here - half shafts, rocker cover, driveshaft and backing plates. PM or text me for bank details and pickup time/address.

b31x
Newbie
Posts: 9
Joined: Fri Dec 16, 2016 10:32 pm
Location: Cambridge

Re: Datsun 1600 parting out

Postby b31x » Sat Nov 04, 2017 12:31 pm

Exhaust headers?

The plastic bit I was talking about...you know when you remove the door card...you often have to open the lever and remove the plastic behind the lever...? That's the bit I'm talking about.

User avatar
DJZ
Committee Members
Posts: 2461
Joined: Mon Apr 05, 2010 6:56 pm
Location: Christchurch

Re: Datsun 1600 parting out

Postby DJZ » Sat Nov 04, 2017 1:34 pm

b31x wrote:Exhaust headers?

The plastic bit I was talking about...you know when you remove the door card...you often have to open the lever and remove the plastic behind the lever...? That's the bit I'm talking about.


The escutcheon?
Nissan 280ZX
Project thread
Other Nissan 280ZX
Project thread

User avatar
broke
Committee Members
Posts: 945
Joined: Mon Apr 04, 2011 11:25 pm
aka: John
Location: Christchurch

Re: Datsun 1600 parting out

Postby broke » Sat Nov 04, 2017 2:20 pm

DJZ wrote:
b31x wrote:Exhaust headers?

The plastic bit I was talking about...you know when you remove the door card...you often have to open the lever and remove the plastic behind the lever...? That's the bit I'm talking about.


The escutcheon?


Ah right. 510's don't have those.

Also the exhaust manifold is broken - a bit of the flange snapped off when removing it!


Return to “Cars / Parts For Sale”

Who is online

Users browsing this forum: No registered users and 1 guest