A12/a14 head PLEASE HELP !!

all your DIY needs
iamkiwiana
Newbie
Posts: 40
Joined: Thu Dec 03, 2015 3:04 pm
Location: Christchurch

A12/a14 head PLEASE HELP !!

Postby iamkiwiana » Fri May 12, 2017 9:09 pm

So i purchase an engine from a mate, it's
18238778_1897871553829228_8445123489892426954_o.jpg
an a12 with a14 head, ported, planed, kelford racing cam and valve springs..
BUT... it didnt come with all valve train, only the valves and springs.
So the question is will my existing a12 head gear work on the a14 head ??
(pushrods, rockers etc) :dance:
You do not have the required permissions to view the files attached to this post.

User avatar
Josh
Financial Member
Posts: 1200
Joined: Tue Jul 22, 2008 5:23 pm
aka: SeEn-ThE_lIgHt
Location: Datsun Capital
Location: Hornby
Contact:

Re: A12/a14 head PLEASE HELP !!

Postby Josh » Fri May 12, 2017 9:46 pm

may pay to double check pushrod length but rockers are the same
1969 Mk1 Escort Coupe~ CA18DET full-on project
1972 B110 Deluxe~ Daily
1965 P410~ Wifey daily

User avatar
classicdat
Committee Members
Posts: 3086
Joined: Wed Apr 21, 2010 9:59 pm
aka: Vaughan
Location: Datsun Central, Christchurch
Contact:

Re: A12/a14 head PLEASE HELP !!

Postby classicdat » Fri May 12, 2017 11:08 pm

A12 push rods will work with A12 Block, head will be fine. Is it Front Dizzy or Mid Dizzy, oil galleries to the Valve gear are different, this could be an issue.
Datsuns from A to Zed


Return to “Tech & DIY Conversion Info”

Who is online

Users browsing this forum: No registered users and 2 guests