DJZ's 280ZX

Show everyone your mean datto projects/rides
User avatar
DJZ
Committee Members
Posts: 2548
Joined: Mon Apr 05, 2010 6:56 pm
Location: Christchurch

Re: DJZ's 280ZX

Postby DJZ » Wed Aug 15, 2018 8:03 pm

The doors on this have always rattled when they're closed and I couldn't figure out why everything looked okay, the doors on the white car close way nicer. Turns out under the plastic in the door strikers is supposed to be some other kind of bush and mine must have perished. Wish I'd bought new screws to go with them but too late now.

Image


Image
Nissan 280ZX
Project thread
Other Nissan 280ZX
Project thread

User avatar
gingofthesouth
Site Admin
Posts: 1907
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: DJZ's 280ZX

Postby gingofthesouth » Wed Aug 15, 2018 9:39 pm

Was thinking of going proximity and push button starter on the 510 too but can't figure out how to make it look nice.
My orangatang 510 here.

User avatar
DJZ
Committee Members
Posts: 2548
Joined: Mon Apr 05, 2010 6:56 pm
Location: Christchurch

Re: DJZ's 280ZX

Postby DJZ » Sun Aug 19, 2018 10:03 am

Finished fixing the front kit, for now at least. When I put the Fairlady Z bumper on the front I'll need to pull it off again and fix it properly, I used the holes that somebody had already drilled in it to put it together but half of them have pulled/broken through as they were too close to the edges.

Removed the mirror switches as I've sold them, I've been looking for a non electric mirror center console but they're really hard to find, there's one on Yahoo but it's brown.

Have fitted the hood prop rod finally too and the new drivers door striker.

It's due for a warrant now so I'll have to take a day off work sometime in the next couple of weeks and take it in to Damo.
Nissan 280ZX
Project thread
Other Nissan 280ZX
Project thread

User avatar
DJZ
Committee Members
Posts: 2548
Joined: Mon Apr 05, 2010 6:56 pm
Location: Christchurch

Re: DJZ's 280ZX

Postby DJZ » Thu Aug 30, 2018 9:30 pm

Have been working on this thing a little bit here and there when I've got time.

3D printed some new door escutcheons, they aren't quite 100% right, will muck around with them on the weekend.

Image

Image


Bought a box of mirrors, going to get rid of the terrible ones that are on the car and fit a pair of OEM manual door mirrors.

Image


Also decided to make some ball joint adaptors like what I made for Asher's car so that I can go back to Z control arms instead of the R30 ones I'm running, will need to muck around with the radius rods as well, this is an R31 ball joint.

Image
Nissan 280ZX
Project thread
Other Nissan 280ZX
Project thread

User avatar
DJZ
Committee Members
Posts: 2548
Joined: Mon Apr 05, 2010 6:56 pm
Location: Christchurch

Re: DJZ's 280ZX

Postby DJZ » Wed Sep 05, 2018 9:27 pm

Decided to have a look at fitting the new door mirrors, it's been a long, long time since I've had the door cards off. The OEM door mirrors are a little bit weird, the right side one is fully plastic, the left hand side one has a metal base (cast zinc?). The bases for all the mirrors I've got are cracked so I'm going to draw up some new ones and 3D print them.

Quality install by whoever put the old ones on.

Image


And this is what the new one will look like, kind of.

Image
Nissan 280ZX
Project thread
Other Nissan 280ZX
Project thread

User avatar
DJZ
Committee Members
Posts: 2548
Joined: Mon Apr 05, 2010 6:56 pm
Location: Christchurch

Re: DJZ's 280ZX

Postby DJZ » Sun Sep 09, 2018 3:25 pm

Got the left hand side mirror painted and installed, I'm just using the cracked base plate things that they came with until I can find the time to make the new ones. Since I'm using the holes that were already drilled in the door they're a bit further forward that factory, I'll see how they go, when I fix the rust and paint the car I'll move them to the factory spot.

Lubed up all the linkages and sliders in the door as well while I had the door card off. Also painted and installed the first escutcheon, they aren't quite right and sit against the handle but will do for now.

Image
Nissan 280ZX
Project thread
Other Nissan 280ZX
Project thread

User avatar
DJZ
Committee Members
Posts: 2548
Joined: Mon Apr 05, 2010 6:56 pm
Location: Christchurch

Re: DJZ's 280ZX

Postby DJZ » Sun Sep 16, 2018 7:50 pm

Pictureless update, this is booked in for a warrant with Damo on Wednesday so I thought I'd better put it back together.

Had to take the car out of the garage to get the drivers door card off, the hardest thing to do on this door was actually getting the replacement clips for the top door trim/wiper bit in, two of them were broken and were sitting in the bottom of the door, I've known something was up for a while as it's been quite loose.

Replaced one of the rubber mounts for the window track to try and get rid of a few rattles. Lubed up the whole mechanism too. Mounted the mirror and glued in the glass after I took it for a test drive.

I'm trying to fix all the little bits and pieces that have been ignored over the years, the boot hatch has rattled ever since I had to change it after the glass got smashed when my sub was stolen. I had to borrow the top stop pieces off the white car as this car hasn't had them for as long as I've had it. One thing lead to another and I ended up replacing the latch on the hatch, the other part of the latch, removing the rear number plate light assembly and lock, the trim on the boot hatch and also the battery (which is in the boot) to try and make it as good as I could. One of the rubber stoppers was missing so I robbed that off a spare hatch.

It's pretty good now though, way better than it was before.
Nissan 280ZX
Project thread
Other Nissan 280ZX
Project thread


Return to “Members Rides & Projects”

Who is online

Users browsing this forum: No registered users and 3 guests