scooters 260C H330

Show everyone your mean datto projects/rides
scooters
Newbie
Posts: 6
Joined: Sat Sep 01, 2018 10:10 pm
Location: Nelson
Contact:

scooters 260C H330

Postby scooters » Sat Nov 10, 2018 10:02 pm

Hi all first post. Usually hang out on Old School. this is now with me in Nelson. As far as I know was put together by Brocky in CHCH and then sold on to James in hamilton.
I was shit scared it was going to be a dead set rot box. But it's in really good order. With just the odd bit of TLC to sort. Credit to all who have had input into this car.
It's full of cavity wax and shows it has really been loved.

I'm really after some old school wheels wheels but I might have to head to Hayashi direct
and / or
if I can find some tripple webers /carbs

any help and id be stoked.

But apart from that it's just going to be a old school cruiser. Not going to JDM it to hard.

EDIT: need to take my own photos and not use past owners.

Image

Image

Image

scooters
Newbie
Posts: 6
Joined: Sat Sep 01, 2018 10:10 pm
Location: Nelson
Contact:

Re: scooters 260C H330

Postby scooters » Sun Nov 11, 2018 11:35 am

I had a bit of expensive miss adventure over the last week or 2.

I decided to try run my trigger on a low ohm coil and get rid of the ballast.

It had poor spark I took some measurements and found I was 2.4v down from batt voltage over to my ballast high. So to cure that I put a relay in to drag a +12 over to coil + and give it full hit.

Turns out the lumintronic needs 3 ohms or resistance. and I put 12 v down the trigger line that was ment to be coil -

derp.

So here I am back to square one with some new wiring and a relay added that now pulls +12 back to ballast high.

Image

the lumentronic has a optic trigger in the dizzy I baked that too..

There goes the best part of $500

lesson learned

maddat1
Financial Member
Posts: 622
Joined: Mon Jan 05, 2009 9:01 pm
Location: Auckland
Contact:

Re: scooters 260C H330

Postby maddat1 » Sun Nov 11, 2018 9:32 pm

Welcome to the datsun family.glad its in good hands.both of the previous owners have looked after your car.hope to see your car some day.
Cheers

Otodat
Datsun Dreamer
Posts: 132
Joined: Thu May 26, 2016 7:59 pm
aka: Steve
Location: Otorohanga
Contact:

Re: scooters 260C H330

Postby Otodat » Mon Nov 19, 2018 4:07 pm

Hi and welcome scooters, that is a sweet ride you have got yourself there, keen to see where it evolves to.

scooters
Newbie
Posts: 6
Joined: Sat Sep 01, 2018 10:10 pm
Location: Nelson
Contact:

Re: scooters 260C H330

Postby scooters » Mon Nov 19, 2018 9:13 pm

Otodat wrote:Hi and welcome scooters, that is a sweet ride you have got yourself there, keen to see where it evolves to.


cheers mate. Never thought id end up with a big old H330. But needs must with family. Happy as I have it.


Return to “Members Rides & Projects”

Who is online

Users browsing this forum: No registered users and 3 guests